Table of Contents
Advertisement
L26 Initial Camera Settings
-
Insert and format an SD memory card.
-
Set Time Zone and Date.
-
Set camera to "Auto
-
Set Electronic VR to "Auto."
-
Set White Balance to "Auto."
-
Set Flash Mode to ON "
-
Set Image Mode to 16m.
-
Set AF-assist to "Off."
A strobe focusing light is recommended to assist AF underwater.
-
Set Continuous to "S" Single.
For more accurate colors, we recommend setting manual white balance
underwater using a white slate or white sandy bottom. Manual white
balance should be reset for each working depth due to color absorption
caused by the water. When adding a UR-Pro color filter, reset manual
white balance.
Note: Enable Macro
overexposure occurs, back away from the subject and zoom in. If
overexposure continues, use "-" exposure compensation.
mode", NOT Easy Auto or Scene Modes.
."
mode when shooting close-up subjects. If
3
Advertisement
Table of Contents
