Table of Contents
Advertisement
ADVANCEDSETTINGS
1
Open menu with »HOME« button.
2
Select menu item »
<
>
»
« or »
« and press »
3
Select menu item »TV« with »
press »
« to confirm.
V
– »TV« menu is active.
4
Select the line »Advanced« with »
»
« and press »
Λ
Settings > TV > Advanced
Picture
Sound
Source
Auto Sleep
Show Logo Display
Power LED Backlight
Power Saving Mode
Permanent Timeshift
Change Area
Change Mode
Note:
Additional operations are explained in the
7
following sections.
Autosleep
This function will turn the television to stand-by
mode in 4 hours depending on your setup, un-
less the television receives any signal, or keys or,
according to European regulations, the remote
remains untouched for 5 minutes.
1
From the »Advanced« menu use »
»
« to select the line »Auto Sleep«.
Λ
2
Select the switch-off time with »
Note:
Set the function to »Off« with »
7
switch off.
3
Press »BACK« to go back one menu level
or press »EXIT« to end the setting.
66
ENGLISH
« with »
«, »
«,
V
Λ
« to confirm.
<
>
« or »
« and
« or
V
« to confirm.
Tuesday
xx xxx xxxx
TV
Network
Timer
Parental
4 Hours
No
Medium
Off
Off
Back
Exit
BACK
EXIT
« or
V
<
>
« or »
«.
<
>
« or »
« to
- -----------------------------------------------------------------------------
Storelogoview
This function is intended for feature introduction
at stores. When »On« is selected, feature logos
are displayed.
1
From the »Advanced« menu use »
»
« to select the line »Shop Logo Display«.
Λ
2
Select »Yes« with »
Note:
Set the function to »No« with »
7
switch off.
3
Press »BACK« to go back one menu level
or press »EXIT« to end the setting.
PowerLEDbrightness
You can adjust power (stand-by) LED brightness
in operation mode of television.
1
From the »Advanced« menu use »
»
« to select the line »Power LED Bright-
Λ
ness«.
<
2
« or »
U se »
»High«, »Medium« or »Low«.
3
Press »BACK« to go back one menu level
or press »EXIT« to end the setting.
V
<
>
« or »
«.
<
« or »
V
>
« to set the brightness to
« or
>
« to
« or
Advertisement
Table of Contents
