SETTINGFURTHERCHANNELS
Displayingsignalinformation
(only for digital television channels)
1
Open the menu with »HOME«.
2
Select menu item »
<
>
»
« or »
« and press »
3
Select the menu item »Source« with »
<
»
« and press »
– » Source« menu is active.
4
Select the line »Advanced« with »
»
« and press »
Λ
5
Select the line »Signal Information« with
« or »
« and press »
»
V
Λ
– » Signal Information« menu is displayed.
Notes:
S ignal information changes depending on
7
the current source.
S ignal information is shown at the top of the
7
menu. The more »Frequency« and »Signal
Strength« bar stretches to the right, the more
signal you have.
T he signal level not only depends on your
7
receiver system, but also on the channel
which is currently active. Remember this
when aligning your antenna using the
signal level display.
6
Press »EXIT« to close the menu.
106
ENGLISH
« with »
«, »
V
Λ
« to confirm.
>
« to confirm.
V
« or
V
« to confirm.
« to confirm.
-----------------------------------------------------
«,
« or