Get Ready Before Use - Narwal Freo X Ultra User Manual

Robot
Indicator
Indicator
Off
√
Steady white
√
Breathing white
√
Steady blue
√
Breathing blue
√
Steady purple
√
Breathing purple
√
Breathing red
√
Breathing orange
√
Colorful meteor light ×
Base Station
Meaning
Indicator
Robot shutdown
Base station shutdown or
touch panel in AOD. Touch
√
to wake up
Base station and robot on
standby
√
Base station and robot idle
√
Cleaning underway
√
Cleaning paused
√
Disinfection underway
√
Disinfection paused
√
Base station or robot
abnormal
or base station and robot
√
disconnected
Pairing or update underway
√
Waking up the base station
√

2. Get Ready Before Use

Install the side brushes
Press side brushes into the slots as indicated
by color until they click into place.
Place the base station
Place the base station against the wall
near the socket and leave an open
space of at least 1.0m in front of the
base station for the robot to enter and
leave the base station.
Note: If the base station is placed tilted or
there are table legs, curtains, and ornaments
around, the robot's obstacle avoidance
function may be triggered, affecting its entry
and exit.
Place the antibacterial detergent
The robot can kill the bacteria on the floor
w i t h t h e a n t i ba cte r i a l d ete rge n t w h e n
mopping.
Turn the antibacterial detergent upside
•
down and insert it into the slot (DO NOT
remove the cap). The detergent bottle is
properly in place when it is fixed without
tipping over.
You can set in the App whether to add
•
antibacterial detergent automatically when
mopping.
09