Table of Contents
Advertisement
Available languages
Available languages
outlet when not in use, before
putting on or taking off parts, and
before cleaning. To disconnect,
turn unit off, grasp plug, and pull
out from wall outlet. Never yank
on cord.
• Do not operate any appliance
with a damaged cord or plug or
after the appliance malfunctions
or has been damaged in any
manner. Return the appliance to
an authorized service facility for
examination, repair, or electrical
or mechanical adjustment.
• Do not leave the appliance unat-
tended while it is running.
•
Connect and operate the appliance only in
accordance with the specifications on the rating
plate.
•
Read all the instructions. Keep these instructions
for future reference.
•
As a protection against electrical shocks, do
not put the base, cord or plug in water or other
liquids.
•
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been provided supervision or instructions on the
use of the appliance by a person responsible for
their safety.
•
If the power is cut, the appliance stays on and
starts again as soon as the power is restored.
•
Turn off the unit and unplug it from the outlet
when not in use, before installing / removing any
parts and before cleaning it. To disconnect it,
turn off the unit and pull the plug out of the wall
outlet. Never yank on the cord.
•
Avoid contacting any moving parts and keep
your fingers out of the discharge openings and
feeding tube of the hopper.
•
To prevent any injury, all repairs such as
replacing a damaged cord should only be carried
out by our customer service.
•
The use of attachments not recommended or
sold by the appliance manufacturer may cause
fire, electric shocks or injury.
•
Do not let the cord hang over the edge of a table
/ counter or touch any hot surfaces.
•
Do not operate this appliance in the presence of
explosive and/or flammable fumes.
•
Do not attempt to tamper with the cover interlock
mechanism.
•
To reduce any risk of electric shock, do not
attempt to remove the bottom cover. There
are no user-serviceable parts inside. Have it
repaired only by authorised personnel.
•
Do not pre-operate before introducing food:
doing so may cause a squeaking noise.
•
Do not attempt to juice any hard materials, large
seeds (seeds which cannot be swallowed or
chewed), pits, ice or frozen foods.
•
If food gets stuck in the feeding tube, do not use
anything other than the recommended pusher.
•
Always make sure that the appliance is in good
working order and that all its removable parts are
secure. Regularly check the power supply cord
and plug for cuts or damage.
•
Make sure your hands are completely dry before
using the knob.
•
Do not use for more than 30 minutes.
BEFORE FIRST USE
Carefully wipe the outside of the appliance to remove
any dust that may have accumulated. Dry with a dry
cloth. Do not use any harsh abrasive cleaners. Wash
the accessories in warm soapy water. Then dry with
a dry towel. Do not immerse the supply cord or any
motor parts of this appliance in water or other liquids.
This appliance has a built-in safety lock
which ensures that you can only switch the
appliance on if you have assembled the juicer
correctly on the motor unit. When assembled
correctly, the built-in safety lock is inactive.
ASSEMBLING THE JUICER (A)
Under the bowl there is a rubber pad allow-
ing the discharge of all the juice only from
the juice outlet. Before juicing, make sure the pad
is plugged in completely to prevent any leakage.
Before you assemble the juicer, ensure that the power
cord is unplugged.
1.
Put the strainer into the strainer holder.
2.
Put the strainer holder into the juice bowl. Be
sure to align the arrow on the strainer with the
it en
11
Advertisement
Table of Contents
