Xerox Phaser 6115 Getting Started page 18

DOCUSP 3.6.xx
2-8
Caveat
The Sides Imaged value for signature layouts
must be either the Queue default value or the
job must be programmed to be Head-to-Toe
regardless of the orientation.
If the original size of the job is changed during
the printing process, such as after a proof has
been run, the Original Size is set to the default
Letter size. Be sure to check and, if
necessary, change the Original Size before
printing the job.
The value shown in the Current Stock Size
field does not update to match the Size value
on the Stock tab.
Applicable printer product
All, Imposition only
All, Imposition only
All, Imposition only
XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED