Table of Contents
Advertisement
DOCUSP 3.6.xx
1-4
v The DocuSP user interface font size adjustment is now
available in the DocuSP user interface under the Setup pull-
down menu. In DocuSP 3.1, the font size adjustment could
only be made through a UNIX command line tool.
v Configuration:
v The system information and configuration windows have
been enhanced with additional information. For
example, the General tab now includes specific details
about the processor speed of the DocuSP controller,
and hard disk sizes and types.
v An icon will now be displayed on the main menu that
indicates debug logging has been enabled or disabled for
troubleshooting purposes.
v The Job Status message has been updated to include a
percentage complete value. The percentage complete is
based on the total number of pages printed in relation to the
number of pages ripped and the quantity of prints. The
percentage displayed changes as the job is ripped and
printed, so very large jobs may display unexpected
percentages based on how much of the job has been ripped.
v Improvements have been made to the Job Status Message
area in Job Properties. The raw byte count is now reported
in Mbytes, and the field for pages printed now reads "Sheets
Delivered".
v The ability to set the Socket Gateway to receive LCDS data
streams from VPS clients can now be set through the
DocuSP Gateways dialog. Prior to this release, the VPS
setup had to be accomplished via a UNIX command.
v The Reprint Manager module has been moved from the Job
Manager to a separate module, and the Reprint Manager
icon now displays on the module tool bar on the left side of
the user interface.
v Enhanced security for DocuSP and the UNIX environment.
For specific information, refer to the System Guide.
v Additional tape formats are now supported by the Tape
Client.
v ICL 2900
v Honeywell Bull
v Implementation of the LCDS workflow for the DocuTech and
DocuPrint 75/90 printers. The majority of the LCDS
workflow that has been available with the DocuPrint 1xx EPS
systems is now available on the 75/90 systems.
v Addition of the On-line Gateway interface and Groupe
Set board.
v Addition of the LCDS decomposer to process LCDS
jobs.
XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED
Advertisement
Table of Contents
