Engine Identification; Initial Receipt Of The Engine; Engine Storage - Beta Marine Beta 28 Operator's Maintenance Manual

ENGINE IDENTIFICATION

IMPORTANT!
number and or the engine serial number in all communications concerning your engine
1 Beta Marine WOC Number
BETA 28, BETA 30, BETA 35 & BETA 38
3 Engine Serial Number

INITIAL RECEIPT OF THE ENGINE

A full inspection of the engine must be made immediately on delivery to confirm that there is no damage. If there is
any damage then write this clearly on the delivery note and inform your dealer or Beta Marine within 24 hours. A
photograph would always help.

ENGINE STORAGE

The engine must be stored in a dry, frost free area and this is best done in its packing case. If storage is to be more
than six months then the engine must be inhibited (contact your dealer or Beta Marine). Failure to inhibit the engine
may result in the formation of rust in the injection system and the engine bores, this could invalidate the warranty.
- We ask if you can always provide the WOC (Works Order Card)
2
The engine serial number is difficult to see. It is stamped
on the crank case above starter motor and below the heat
exchanger, on the port side of the engine. The number is
also shown on the rocker cover label.
4