Engine Identification; Initial Receipt Of The Engine; Engine Storage - Beta Marine Beta 50 Operator's Maintenance Manual

ENGINE IDENTIFICATION

IMPORTANT!
provide the WOC (Works Order Card) number and/or the engine serial number.
1 Beta Marine WOC Number
BETA 43, BETA 50 & BETA 60
3 Engine Serial Number

INITIAL RECEIPT OF THE ENGINE

A full inspection of the engine must be made immediately on delivery to confirm that there is no damage. If there is
any damage then write this clearly on the delivery note and inform your dealer or Beta Marine within 24 hours. It would
be appreciated for any claims to be supported by relevant photographs.

ENGINE STORAGE

The engine must be stored in a dry, frost free area and this is best done in its packing case. If storage is to be more
than six months then the engine must be inhibited (contact your dealer or Beta Marine). Failure to inhibit the engine
may result in the formation of rust in the injection system and the engine bores, this could invalidate the warranty.
- To ensure you receive the correct advice or parts we ask you to always
2
The engine serial number is shown on the rocker cover
label. It is also stamped on the crank case just below the
fuel injection pump on the starboard side of the engine.
4