Table of Contents
Advertisement
Step 3
Before installing a M.2 (NGFF) SSD
module, please loosen the screws to
remove the M.2 heatsink.
*Please remove the protective films
on the bottom side of the M.2
heatsink before you install a M.2
SSD module.
Step 4
Prepare the M.2 standoff that comes
with the package. Then hand tighten
the standoff into the desired nut
location on the motherboard. Align
and gently insert the M.2 (NGFF)
C
B
A
20
o
SSD module into the M.2 slot. Please
be aware that the M.2 (NGFF) SSD
module only fits in one orientation.
C
B
A
Step 5
Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw
C
as this might damage the module.
NUT2
NUT1
36
Advertisement
Table of Contents
