Warranty Symmetry XG Symmetry Youth XG Advanced Technology Standing System Manufactured By Prime Engineering A Division of Axiom Industries, Inc. 4202 W. Sierra Madre Avenue Fresno, CA 93722 USA Tel: (559) 276-0991 Toll-free: (800) 827-8263 Fax: (800) 800-3355 E-Mail: Info@primeengineering.com Web Site: www.primeengineering.com...
Symmetry/Symmetry Youth XG Advanced Technology Standing System Self Lifting Table Top Body Support Pad Contoured Back Panel Flip-up Arms Rigid Back Support Bar Pump Handle Locking Tray Adjust Knob Swingaway Lateral Supports Hip Guides Lift Arms Easy Seat Depth Adjustment Sliding Back Ad- justment Link Casters x 4...
Congratulations on receiving your Symmetry XG Standing System This unit has been shipped to you mostly assembled on a pallet and only requires a few minor steps to assemble the unit for use. Most of the remaining steps to complete the unit follow in this manual. If you have items other than what is in this document you should look for individual instructions included along with those items.
Page 4
Pump Handle If you have not taken the handle from location “B” as shown in Figure 5, remove the handle from its location and remove the bubble wrap. The lower handle will always be on the same side as the hydraulic pump. Loosen the attachment knob “C”...
Adjusting the seat depth Seat depth adjustment is done by moving the back assembly forward or back by pulling out one of the two plunger knobs as detailed below, moving it to the next location then releasing the plunger. After one is located in its position simply repeat the step with the other plunger knob.
Page 6
Adjusting the Tray Assembly Adjusting Tray Height The tray assembly is adjustable in height and in Anterior and Posterior movement. Loosen the large black knob “I” as showing in Figure 16, then pull the knob forward while pressing down on the tray surface to release the tray for adjustment.
Page 7
Lateral supports (Optional Item) Back Bar and Armrests (Standard with an Optional When Lateral Chest supports are ordered on a Symme- Back assembly, not available without a back) try XG and shipped on a pallet, those supports will be The Back Support Bar “Q” comes installed on the back pre-mounted onto the back posts as shown in Figure 20.
Page 8
Figure 25 Figure 26 Using the Symmetry XG Swivel Feature Getting in and out of the Symmetry XG is made easy by the use of our exclusive Swivel Seat Feature. Along with the swing-up Knee Supports, Flip-Up Lift Arms and minimal frame footprint. To swivel the seat, press the release lever on the front of the seat.
Using Patient Lifts Symmetry XG’s open frame design allows better access during transfers even when a lifting device is needed. This base design allows for usage with most major styles and types of lifts without costly and hard to use frame modifications. Using a patient lift with our frame does not require any special modification(s).
DAILY USAGE: GETTING ON YOUR FEET: Symmetry XG Standing Systems can be used while doing many of your everyday activities, reading, watching television, eating and studying. Locate your Symmetry XG in your main areas of activity. Set up your Symmetry XG stander as your therapist has indicated to best support you in proper standing.
Symmetry XG / Symmetry Youth XG Standing Systems Limited Warranty Effective January 1, 2017 Warranty coverage is extended to the original purchaser for as long as the original purchaser owns the Prime Symmetry XG / Symmetry Youth XG (the product) standing Engineering system.
Need help?
Do you have a question about the Prime Engineering Symmetry XG and is the answer not in the manual?
Questions and answers