External Display - Toshiba Satellite W30t-A Series User Manual

Removing memory media
The following instructions apply to all types of supported media devices. To
remove memory media, follow the steps as detailed below:
1.
2.
3.
4.

External display

Your computer video capabilities can be enhanced with additional displays.
External displays allows you to share your desktop or extend the desktop
area.
Connecting an external display
Your computer comes with a built-in display, but you can also connect
other external displays via available ports on the computer.
The HDMI port
HDMI (High-Definition Multimedia Interface) port digitally transfers both
video and audio data without reducing the quality. HDMI-compatible
external display devices including televisions can be connected via the
HDMI port.
To connect an HDMI-compatible display device, follow the steps as
detailed below:
As the port operation of all HDMI display devices have not been confirmed,
some HDMI display devices may not function properly.
To connect a device to the HDMI port, you must purchase an HDMI cable.
1.
2.
User's Manual
Click the Desktop tile and open the Safely Remove Hardware and
Eject Media icon on the Windows Taskbar.
Point to memory media and click the left Touch Pad control button.
Push the memory media until you hear a click to partially release it.
Grasp it and pull it out of the slot.
If you remove the memory media or turn off the power while the
computer is accessing the memory media, you may lose data or
damage the media.
Do not remove the memory media while the computer is in Sleep or
Hibernation Mode. The computer could become unstable or data in
the memory media could be lost.
Do not remove only the miniSD/microSD Card while leaving the
adaptor in the memory media slot.
Plug one end of the HDMI cable into the HDMI port of your HDMI
display device.
Plug the other end of the HDMI cable into the micro HDMI port on your
computer.
4-14