Advertisement
4. Settings on my-PV
In the control settings "IME C. D4 MID (Modb RTU)" must be selected.
Alternatively, these settings can also be made on the web interface. To do this, the my-PV device
must also be integrated into the local network.
If there is a ESS/battery in the system and this is to be charged as a priority, then the "control
target" should be set to -150 W. Otherwise, we recommend leaving it at -50 W
my-PV GmbH
Betriebsstrasse 12, 4523 Neuzeug
www.my-pv.com
AC•THOR / AC ELWA 2 with IME Conto D4 Modbus MID, Version 240115
Subject to change.
3
Advertisement
