Bi-Directional RS422/RS232 Converter
INTRODUCTION
RS232 is an un-balanced serial data format allowing for transmission lengths up to 100ft. This
distance specification limits the use of this format when used in residential and commercial
automation control system applications. RS422 is a balanced serial data format with a distance
specification of up to 4000ft allowing for a more flexible automation control system configurations.
Xantech's RS422232 Converter is a bi-directional serial converter, converting between these two
formats, in-turn, increasing the maximum distance RS232 devices can be used in.
This product serves two main functions:
1. Convert standard Serial RS232 signals to a balanced RS422 line allowing for increased
transmission lengths in upwards of 4000ft over a single CAT5 cable.
2. Companion accessory to the SmartPad LCD™ Touch Screen Panels Serial RS422
output, allowing the SPLCD to control a multitude of RS232 devices in remote locations.
FEATURES / SPECIFICTIONS
•
RS232 I/O Connection: Connects to RS232 Devices via a standard DB9 connection wired to standard
•
RS422 I/O Connection: Standard RJ45 connection.
•
RS422 Wiring:
•
RS232 Wiring:
Note: Since the RS422232 converter allows RS232 to be run over long distances, it is recommended
that the unit be placed as close to the RS232 device as possible.
•
Data Tx/Rx LED:
•
Power Requirement:
•
Power Connection:
•
Power Indicator LED: Red LED indicating presence of 12VDC power.
•
Current Rating:
INSTALLATION INSTRUCTIONS
MODEL RS422232
Figure 1 – RS422232 Converter
PC Serial Port Specifications.
CAT5 or higher up to 4000ft (under ideal wiring conditions) wired to the
ETIA/TIA 568B standard.
Standard Serial DB9 cable up to 100ft (under ideal wiring conditions).
Green LED indicating Data is being transmitted through both data ports.
Regulated 12VDC Power is required. (Xantech 781RG Power supply included)
2.1mm Coaxial Plug (Center Pin=12VDC; Sleeve=Chassis GND)
75mA @12VDC
1 of 3