Related Manuals for Xantech RF2IR2W
Summary of Contents for Xantech RF2IR2W
- Page 1 RF2IR2W RF To IR/RS232 Converter-2Way Quick Start Installation Instructions - 1 - Get other manuals https://www.bkmanuals.com...
- Page 2 ATTENTION: Requires the XTR39 to operate. - 2 - Get other manuals https://www.bkmanuals.com...
- Page 3 Welcome! The RF2IR2W base station is the ultimate Xantech accessory to the Xantech XTR39 Color LCD remote color. It’s a receiver that accepts the Radio Frequency output of the XTR39 remote and translate it into IR and RS232 command signals that can control virtually any IR or RS232 electronic device.
- Page 4 Receive RS232 Commands Quick Start Instructions Step 1. Plug the (4) 283M emitters (included) into the RF2IR2W. Next, place the 283M emitter head directly over the IR eye on the source component to be controlled. Step 2. Plug the RS232 Adapter Cable into the RF2IR2W port labeled RS232. Next, connect the DB9 plug to the source component to be controlled.
- Page 5 Step 3. Plug the power supply into the RF2IR2W port labeled 12VDC. The IR and RF LED lights will illuminate for 10 seconds. This is part of the start-up sequence. After the LED lights turn ‘off’, the RF2IR2W is ready to be used.
-
Page 6: Care And Maintenance
• The RF2IR2W should be placed on a flat, stable surface. • For optimal performance, the RF2IR2W should be placed at a height greater than 3 feet above the floor. The ideal height should be level to the XTR39 transmitter.