Advertisement
Setting the Time
1
2°4°6 3e5e/
Panasonic
REC TIMER
For example:
To set the time at 16:20 (4:20 PM)
6
Turn the jog dial to adjust the correct minute
display.
Note that the minute "00" display appears following "59", but
the hour display is not changed.
1
Press the clock/timer button.
2
Turnthe jog dial to select the ''CLOCK"' mode.
The display will change to "P-TIMER"—""R-TIMER'—"SLEEP"
—"CLOCK".
@The display will return to what was previously indicated if 10
or more seconds are allowed to elapse before the next
operation
is accomplished.
Flash
3
Press the setting button.
lashing
7
Press the setting button to finish setting the
time.
The display will change to the previous display.
eWhen the minute display is set correctly and the setting
button
is pressed, the clock is reset to "0" second.
@The display will return to the previous indication after one
Flashing
second later.
4
Turn the jog dial to adjust the correct hour
aiston
e"E" appears on the display when the power cord is connected or
display.
electricity failure. Set the time once again.
FWD:
Increase.
REV:
Decrease.
5
press the setting button.
Flashing
<46=
Ni Seiad lana a rae aE A Na a ala tile ade nda
dal oat
Advertisement
