Advertisement
PS es eee eet
Front Panel Controls and Functions
(continued)
Amplifier section
©
©
Power "STANDBY (/ON' switch
(POWER STANDBY (/ON)
This switch switches ON and OFF the secondary circuit power
only. The unit is in the "standby" condition when this switch is
set to the STANDBY () position. Regardless of the switch
setting, the primary circuit is always "live" as long as the power
cord is connected to an electrical outlet.
Equalizer ON/FLAT button
(EQ, -ON/FLAT, -DEMO)
This button is used to switch the equalizer on or flat. If you
press and hold this button, sound effects will be sequentially
changed (Demonstration function).
Input select buttons
(PHONO, TAPE, CD, TUNER)
These
buttons are used to select the sound
source to be
heard.
Display mode select button
(DISPLAY, -SPECTRUM, —-MODE)
This button is used to select one of five spectrum curves. If
you press and hold this button, the display mode will change.
Volume level control (VOLUME)
This control is used to adjust the volume level. Note that -- dB
is the lowest volume setting and 0 dB is the highest level
setting.
Volume preset button (VOL. PRESET)
This button is used when making a volume presetting for timer
play.
Remote control signal sensor (SENSOR)
Super bass button (SUPER BASS)
When this button is pressed, the dynamic low frequency
ranges are boosted.
-10—
@
@® @® ©
@
Equalizer mode select button
(-EQ MODE, -FIXED/USER)
This is used to select the equalizer mode. If you press and
hold this button, the equalizer mode (FIXED or USER) will be
switched.
Equalizer level-control buttons (EQ LEVEL)
These buttons are used to adjust of the equalization level.
Surround button (SURROUND)
This button is used to activate the surround sound effect.
Karaoke button (KARAOKE)
This button is used to perform "karaoke" (making microphone
mixing with an accompaniment).
Microphone volume control (MIC VOL.)
This control is used to adjust the microphone volume level.
Advertisement
