Texas Instruments 990 User Manual page 72

~-------
~
94'289-9701
The following are examples of three of the options. The printout are of the statistics that could be
displayed and arc followed by an explanation of some of the statistics shown.
Example:
General format:
COMMAND: ST
OPTION: CUR
Statistics Display
at the
DXlO
2710 Emulator
DXl0/2780
2.0.0 79.046
COMM DISCONNECTED
TRANSP.ARENCY OFF
END OF MEDIA OFF
RECEIVE PATHNAME OFF
SEND REIJIJEST OFF
PRINT FILE VFC: OFF
BLOCI< LENGTH OFF 00400
TRANSMIT RECORD LENGTH
00080
RECEIVE PRINT RECORD LENGTH 00132
RECEIVE PUNCH RECORD LENGTH 00080
RECORDS PER BLOCK 00007
Condensed format:
COMMAND: ST-CUR•
Statistics Display
at the
DXlO
3710 Emulator
DXl0/3780
2.0.0 79.046
COMM DISCONNECTED
TRANSPARENCY OFF
COMPRESSION/EXPANSION OFF
RECEIVE PATHNAME OFF
SEND REQUEST OFF
PRINT FILE VFC OFF
BLOCK LENGTH
00512
TRANSMIT RECORD LENGTH
00080
RECEIVE PRINT RECORD LENGTH
00132
RECEIVE PUNCH RECORD LF.NGTH
00080
The information displayed represents the status of the communication link and those values either
set by a command or set during installation that have not been varied by a command during this
session. In addition to the statistics shown in the example. the following information may also be
displayed in response to the CUR option:
• Pathname of any currently open command file.
• Pathname of any currently open log file.
• Transmit pathname if transmit active or transmit pending.
• Receive print pathname if active.
• Receive punch pathname if active.
Example:
General format:
Condensed format:
COMMAND: ST
OPTION: CT
COMMAND: S"PC"P
Digital Systems Group
•