Instrument And Manual Identification; Options; Accessories; Safety Considerations - HP 3476A Operating And Service Manual

Model 3476A
covered by an errata or change sheet. These specifications
supersede any prior published specifications. Supplemental
information in Table 1-2 is provided to describe general
operating characteristics.
1-7. INSTRUMENT AND MANUAL IDENTIFICATION.
1-8. Hewlett-Packard uses a two-section serial number. I he
first section (prefix) identifies a series of instruments. The
last section (suffix) identifies a particular instrument within
the series. A letter between the prefix and the suffix identi-
fies the country in which the instrument was manufactured.
The manual is kept up-to-date at all times by means of a
change sheet which is supplied with the manual. If the serial
number of your instrument differs from the one on the title
page of this manual, refer to the change sheet supplied with
the manual. All correspondence with Hewlett-Packard
should include the complete serial number.
1-9. OPTIONS.
1-10. Table 1-3 lists the options available for the Multi-
meter.
1-11. The instrument contains a label identifying the line
voltage for which the instrument is wired. If the jumper
wires are changed to accomodate a different line voltage,
the label must also be changed to indicate the new config-
uration.
NOTE
If the instrument is to be operated at a line fre-
quency other than the one indicated on the
label, it will be necessary to perform the Clock
Frequency Adjustment in Section V of this
manual.
Section I
Table 1-3. Options.
Option
Description
Standard
104-127, 54-66 Hz, 6 VA, 60 mA Max.
001
86-106, 54-66 Hz, 6 VA, 70 mA Max.
002
86-106, 48-54 Hz, 6 VA, 70 mA Max.
003
004
190-230,
208-150,
48-54 Hz, 6 VA, 30 mA Max.
48-54 Hz, 6 VA, 30 mA Max.
1-12. ACCESSORIES.
1-13. The accessories available for use with the Multimeter
are listed in Table 1-4.
Table 1-4. Accessories.
Accessory Number
Description
Model 11096A
Model 11096A
Adapter
Model 11067A
Model 11068A
R F Probe, 100 kHz to 500 MHz ( down
3 dB at 10 kHz and 700 MHz)
1251-4242
Universal Test Lead Kit
Soft Carrying Case
1-14. SAFETY CONSIDERATIONS.
1-15. This Operating and Service Manual contains cautions
and warnings alerting the user to hazardous operating and
maintenance conditions. To ensure the safety of the operat-
ing and maintenance personnel and retain the operating
condition of the instrument, these instructions must be
followed_
1-3/1-4