Advertisement
Mast-Arm Installation
1.
Loosen 2 x M10 hex grub screws, connect power cable and
feed through spigot and cable gland, adjust alignment and
tighten screws.
Suspended Installation
1.
Align spigot to the column socket, insert and rotate 50
degress to lock. Tighten locking screw/s on column socket
to 10 Nm.
Align slot to column socket
2 x M10 Hex socket grub screws
2 x M10 half lock-nuts
Tighten to 10 Nm
3
Advertisement
