Advertisement
Foreward
Thank you for choosing this quality Ibex product.
We've been providing New Zealand businesses with high
performance lighting solutions since 1967.
Please read these instructions carefully. It's important that you
understand them completely before installation and use.
Safety Warnings
Please follow these safety guidelines to ensure your LED fitting
functions correctly. Ibex warranty does not cover problems or
damages that occur as a result of mishandling or from non-
compliance with these instructions.
1.
Prior to installation, make sure the fitting has not been damaged
during transport. If damage has occurred, do not use. Keep the
fitting in its original packaging and notify us. We'll arrange to
repair or replace the fitting at our discretion.
2.
The fitting must be installed and maintained by a qualified
electrician.
3.
It is the installers responsibility to ensure the fitting is installed
in a location that provides suitable structural integrity.
4.
Do not connect the cables with the power on. Check the
connection is correct and that no short circuit will occur before
powering on.
5.
The external flexible cables fixed to the fitting cannot be
replaced. If a cord is damaged, do not use.
6.
Suitable for outdoor use only.
7.
Seismic restraints (where required) are the responsibility of the
installer.
8.
The light source of this luminaire is not replaceable; when the
light source reaches its end of life the whole luminaire shall be
replaced.
9.
To clean the external surfaces of the fitting, wipe with a
soft cloth dipped in diluted washing detergent. Do not use
sandpaper, polishing powder or any other cleaning agent that
may cause damage to the fitting.
10.
Installers responsibility to ensure the fitting is installed in
accordance with New Zealand wiring regulations.
11.
Remove all packaging materials from the fitting including clear
plastic wrap prior to installation.
1
Advertisement
