Safety Information; Safety During Operation - Savin SLP26 Setup Manual

Hide thumbs Also See for SLP26:
Table of Contents

Advertisement

Safety Information
When using your printer, the following safety precautions should always be fol¬
lowed.
Safety During Operation
In this manual, the following important symbols are used:
A
WARNING:
Indicates a potentially hazardous situation which, if instructions
are not followed, could result in death or serious injury.
A CAUTION:
Indicates a potentially hazardous situation which, if instructions are
not followed, may result in minor or moderate injury or damage to
property.
A WARNING:
Connect the power cord directly into a wall outlet and never use an ex¬
tension cord.
Disconnect the power plug (by pulling the plug, not the cable) if the
power cable or plug becomes frayed or otherwise damaged.
To avoid hazardous electric shock or laser radiation exposure, do not
remove any covers or screws other than those specified in this man¬
ual.
Turn off the power and disconnect the power plug (by pulling the plug,
not the cable) if any of the following conditions exists:
You spill something into the equipment.
You suspect that your equipment needs service or repair.
Your equipment's cover has been damaged.
Do not incinerate spilled toner or used toner. Toner dust might ignite
when exposed to an open fiame.
Disposal can take place at our authorized dealer or at appropriate col¬
lection sites.
Dispose of the used toner cartridge in accordance with the iocai reg-
uiation.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Slp26nP7026P7026n

Table of Contents