Table of Contents
Advertisement
2. Installing Options
A
CAUTION:
_
•
Be sure to turn off the printer and wait for about an hour before instaiiing
options. Not waiting for the printer to cool down can result in a burn.
•
When lifting the printer, use the inset grips on both sides of the printer, oth¬
erwise the printer might fall and cause personal injury.
•
When you move the printer, unplug the power cord from the wall outlet to
avoid a fire or an electric shock.
^Important
□ Rating voltage of the connector for options; Max. DC24V.
Option List
# Note
□ See the inside front cover of this manual to confirm which printer (Type 1
or Type 2) you have.
Type 1 Printer
Type 2 Printer
Paper Feed Unit Type 2600
o
o
Envelope Feeder Type 2600
o
o
1
-bin Shift Sort Tray Type 2600
o
o
CS380 (Mailbox)
o
o
AD410 (Duplex Unit)
o
o
Memory Unit TypeB 64MB
o
o
Hard Disk Drive Type 2600
o
o
Network Interface Board Type 2600
o
1394 Interface Unit T
3
^e 2600
o
o
O : This option can be installed.
You can install any combination of these units. Up to two Paper Feed Units can be
installed to the printer at the same time.
The Envelope Feeder Unit requires the installation of the Paper Feed Unit.
The Network Interface Board and the 1394 Interface Unit cannot be installed to the
printer at the same time.
The 1-bin Shift Sort Tray and the Mailbox cannot be installed to the printer at the
same time.
11
Advertisement
Table of Contents
