PSC Baby Zeus Operation Manual page 8

Table of Contents

Advertisement

AC INDICATOR:
Whenever the unit is plugged into AC power, the BLUE "AC" LED will light
indicating AC power is connected. Whenever the AC indicator is lit, the batteries will be charged
(if needed). In addition, you can power your equipment anytime the unit is connected to AC
power whether or not the battery is fully charged.
Please note that the AC indicator may stay on
after the unit is unplugged for several minutes if the unit was in a high charge mode when it was
unplugged. This is normal and nothing to be concerned with.
BLUE LED indicating AC power is connected
BATTERY PROTECTION FUNCTION:
The Internal protection circuitry protects the LiFEPO4
battery in four different ways:
1. It protects the battery from deep discharge conditions.
2. It protects the battery from over charge conditions.
3. It protects the battery from overly high discharge rates (short circuits).
4. It protects the battery from excessive charge currents.
If you were to somehow short out multiple outputs of the PSC Baby Zeus, the battery protection
will disconnect the batteries from the load. If this happens, the protection circuit can be reset
by plugging in the PSC Baby Zeus to AC power and the protection circuitry will automatically be
reset.

Advertisement

Table of Contents
loading

Table of Contents