Table of Contents
Advertisement
Quick Links
Echoflex Installation Guide
Elaho Preset Station
Overview
Elaho Preset Stations activate built-in presets in
compatible power control products.
Station faceplates and buttons are available in
cream, ivory, gray, black, and signal white. Preset
stations are provided with station electronics,
buttons, faceplate, a termination kit, and
Installation hardware.
This document guides you through the installation
and local configuration of the Preset Station.
Advanced (custom) functionality is available using ElahoAccess.
Custom Configuration
For information about the custom configuration options available for the
Preset Station using ElahoAccess, reference the ElahoAccess Mobile App
integrated help system. User documentation is available for download on
our website echoflexsolutions.com.
Note:
ElahoAccess, DIP switch 2 must be enabled. See
Switches on the next
Prepare for Installation
Preset Stations ship with a termination kit for use with Belden 8471 (or
equivalent wire) and contains a power pigtail, a ground wire pigtail,
receptacle spacers, and all required wire termination connectors for
installation.
The station installs into an industry standard single-gang back box (RACO
690 or equivalent - provided by others) or an optional surface mount back
box (part number 7081A2004-1) sold separately and available from
Echoflex.
Corporate Headquarters n Middleton, WI, USA | +1 608 831 4116
© 2023 Echoflex Solutions, Inc. | Trademark and patent info:
Web
echoflexsolutions.com
Third-party license agreement
change. Echoflex intends this document to be provided in its entirety.
8140M2110 Rev C Released 2023-06
To use the configuration settings applied using
page.
| Email
info@echoflexsolutions.com
info: etcconnect.com/licenses
echoflexsolutions.com/ip
| Support
service@echoflexsolutions.com
| Product information and specifications subject to
Rotary and DIP
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for echoflex Elaho Preset Station
Summary of Contents for echoflex Elaho Preset Station
- Page 1 Corporate Headquarters n Middleton, WI, USA | +1 608 831 4116 © 2023 Echoflex Solutions, Inc. | Trademark and patent info: echoflexsolutions.com/ip echoflexsolutions.com | Email info@echoflexsolutions.com | Support service@echoflexsolutions.com Third-party license agreement info: etcconnect.com/licenses | Product information and specifications subject to change. Echoflex intends this document to be provided in its entirety. 8140M2110 Rev C Released 2023-06...
- Page 2 Preset Stations connect to the EchoConnect communication bus. EchoConnect is a bi-directional protocol that uses one pair of wires (data+ and data–) for both data and power. Echoflex recommends using Belden 8471 Class 2 wire (or approved equal – see the Echoflex cable cross database echoflexsolutions.com/files/Elaho_Data_Cable_Wire_ Specs for equal alternatives).
- Page 3 Echoflex Installation Guide Elaho Preset Station By default, these switches are set to Address 1 and Space 1. Commands are shared by all devices within a given space. 1. Set the Space rotary switch to the desired number (1 through 16) for the space you want to control.
- Page 4 Echoflex Installation Guide Elaho Preset Station Installation Installation should follow all local codes and standard electrical practices. The back box should be installed level and square for best results. Ensure that the back box is clean and free of obstructions.
- Page 5 Echoflex Installation Guide Elaho Preset Station 3. Terminate EchoConnect wires. EchoConnect is topology free; you may install the wires in any combination of bus, star, loop, or home- run. a. Strip 11 mm (7/16 in) from the ends of each power pigtail wire provided in the termination kit and from the installed control wires.
- Page 6 Echoflex Installation Guide Elaho Preset Station Install the Faceplate The faceplate is secured to the station with two magnets that are located on the bottom edge of the faceplate. 1. Align the top of the faceplate approximately 20 degrees to the station.
- Page 7 Echoflex Installation Guide Elaho Preset Station Settings Settings for Basic config mode (DIP switch 2 set to Off) can be modified locally, including changing which presets are assigned to the station, changing the button LED color, and preset recording at the station.
- Page 8 The button LED flashes four times to confirm the record action. Service If you have any difficulties installing your system or with system startup please, contact Echoflex Technical Services. Echoflex contact information is located at the bottom of page 1 FCC Compliance This device complies with Part 15 of the FCC Rules.
Need help?
Do you have a question about the Elaho Preset Station and is the answer not in the manual?
Questions and answers