Seat Tarraco Owner's Manual page 4

Fig. 5 Front passenger seat: adjustment and
assembly according to the Top Tether belt.
●
Deploy the Top Tether belt according to the
child seat manufacturer's instructions.
●
Position the belt under the headrest (accord-
ing to the instructions of the seat itself, lift or
remove the headrest if necessary)
›››
Fig. 4.
For vehicles with built-in head restraints, pass
the strap through the gap in the head restraint
›››
or over it Fig. 5.
2
●
Slide the belt and secure it properly with the
anchor on the rear seat backrest
›››
Fig. 2.
●
Tighten the belt securely according to the
manufacturer's instructions.
Release the tether belt
●
Slacken the belt according to the manufac-
turer's instructions.
●
Press the lock and release it from the anchor
bracket.
WARNING
Installing safety seats incorrectly will in-
crease the risk of injury in the event of a colli-
sion.
›››
Fig. 3,
●
Never attach the tether belt to a fastening
hook in the luggage compartment.
●
Never attach or secure luggage or other
items to the lower anchor points (ISOFIX) or
Top Tether anchor points.
Safety
›››
Fig. 1 ,
If you want to fit a universal approval category
(U) child seat in your vehicle, you must check
that the seat is approved for your vehicle.
You will find any necessary information on the
child seat's orange ECE approval label.
The following table shows the different fitting
options.
WARNING
Child restraint anchors are designed to sup-
port the loads of properly adjusted child
restraint systems. Under no circumstances
should they be used to attach adult seat
belts, harnesses or other items or equipment
to the vehicle.
Fitting a child seat using the seat
belt