Easy Camp Chilly 600031 Instruction Manual page 2

UK: INSTRUCTION
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USE
INTENDED USE
The appliance is intended for camping use.
Work Performance:
• Food may only be stored in its original packaging or in suitable containers.
• For optimum cooling we advise using pre-chilled food and drinks. Unchilled food and drinks will take 2-3
hours to cool depending on volume and ambient temperature.
• The heating function is not designed to heat cold food but to help keep food warm. Food can be kept
warm for over two hours.
• Opening the lid for long periods can cause a signi cant increase of the temperature in the compartments
of the appliance.
• If used properly and instructions in this manual are followed the temperature of foods can be maintained
for several hours.
• Surfaces that come in contact with food and accessible drainage systems should be cleaned regularly.
• Store raw meat and sh in suitable containers in the refrigerator, so as to avoid any contact with or drippng
onto other food.
Instructions for use:
• Make sure that the switch at the back of the coolbox is in 'OFF' position. Then plug the power cable into
the unit's socket.
• Plug in the power cable of the cool box
• Cooling: Select 'COLD' mode. The green indicator lights up to show that the unit is in cooling mode.
Heating: select 'HOT' mode. The red indicator lights up to show that the device is in heating mode.
Use with a car battery (DC12V)
• The car engine must be running .
• Connect the DC power cord to the cigarette lighter in the car.
• Select DC mode.
Connection to the mains (200~ 240 V AC)
• Connect the AC power cable (mains cable).
• Insert the concentric plug into the socket.
• Select AC mode.
If this coolbox runs on 12V, Eco mode is not possible. If it runs on 230V both Max and Eco mode are possible.
Replacing the DC plug fuse (12V)
• Unplug the cable from the 12V socket and the coolbox.
• Turn the plastic cap anticlockwise. Remove plastic and metal cap. Replace fuse with a new one that has the
same rating (T6,3A/250V).
• Re-assemble the plug in the reverse order.
Replacing the AC plug fuse (220-240V)
• Unplug the cable from the mains socket and the cooler.
• Unscrew the large screw in the centre of the plug. Remove back cover. Replace fuse with a new one that
has the same rating (BS 1362 /3A).
• Re-assemble the plug in the reverse order.
2