Table of Contents
Advertisement
en Troubleshooting
Fault
lights up.
flashes.
"Hot" and the drum ro-
tates.
"H:95" lights up altern-
ately with End.
All other error codes.
The appliance is not
working.
42
Cause and troubleshooting
The tap is turned off.
Turn on the tap.
▶
The water inlet hose is kinked or jammed.
Ensure that the water inlet hose is not kinked or
▶
jammed.
Water level measurement system is defective.
Call the after-sales service.
▶
→ "Customer Service", Page 51
The temperature is too high.
Wait until the temperature has dropped.
▶
→ "Cancelling the washing programme", Page 33
▶
Water level is too high.
Select a suitable programme for draining.
▶
→ "Programmes", Page 26
Door is not closed.
Close the door.
1.
Press
to start the programme.
2.
Laundry is caught in the door.
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press
to start the programme.
4.
Cooling process active.
Not a fault.
1.
Do not change the programme during the cooling
2.
process.
Note: The cooling process takes up to 10 minutes.
You can continue to operate the appliance.
Drum cleaning is required.
→ "Cleaning the drum", Page 36
▶
The water pressure is low.
See
▶
→ " ", Page 42
Malfunction
Call the after-sales service.
▶
→ "Customer Service", Page 51
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker in the fuse box has tripped.
Advertisement
Table of Contents
