Table of Contents
Advertisement
en Troubleshooting
Fault
"E:35 / -10"
lights up.
flashes.
"Hot" and the drum ro-
tates.
42
Cause and troubleshooting
The tap is turned off.
Turn on the tap.
▶
The water inlet hose is kinked or jammed.
Ensure that the water inlet hose is not kinked or
▶
jammed.
Water level measurement system is defective.
Call the after-sales service.
▶
→ "Customer Service", Page 51
There is water in the base trough.
Turn off the water tap.
▶
Call the after-sales service.
▶
→ "Customer Service", Page 51
The appliance is leaking.
Turn off the water tap.
▶
Call the after-sales service.
▶
→ "Customer Service", Page 51
The temperature is too high.
Wait until the temperature has dropped.
▶
→ "Cancelling the washing programme", Page 33
▶
Water level is too high.
Select a suitable programme for draining.
▶
→ "Programmes", Page 26
Door is not closed.
Close the door.
1.
Press
to start the programme.
2.
Laundry is caught in the door.
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press
to start the programme.
4.
Cooling process active.
Not a fault.
1.
Do not change the programme during the cooling
2.
process.
Note: The cooling process takes up to 10 minutes.
You can continue to operate the appliance.
Drum cleaning is required.
→ "Cleaning the drum", Page 36
▶
Advertisement
Table of Contents
