Voice Search; Ir Sensor - Philips 70PUT7908 User Manual

Bottom
1 - EXIT
To return to previous menu.
2 - Volume
Press + or - to adjust the volume level.
3 - Number keys
To select a channel directly.
4 - AD
To access the Audio Description and toggle to switch on
and off. Long press to open Subtitle page.
5 - Channel
Press + or - to switch to the next or previous channel in
the channel list.
6 - Mute
Press to mute the sound or to restore it.
7 - DASHBOARD
To launch Dashboard on side of screen to access Settings,
device controls, notifications and more.
Pair Your Remote Control to TV
This remote control uses both Bluetooth® and IR
(infrared) to send its commands to the TV.
• You can use this remote control via IR (infrared) for
most operations.
• To use advanced operation like voice search and
remote control keyboard, you need to pair (link) the TV
with the remote control.
When you start the initial TV installation, the TV invites
you to press Home + Back key to pair the remote control.
It is suggested to complete the pairing during the first TV
installation.
Note:
1 - Once the remote control has entered pairing mode
successfully, the blue LED indicator ring around the
microphone on the front side of the remote control
starts blinking.
2 - The remote control must be kept close to the TV
(within 1m distance) during pairing in order to ensure
success.
3 - If the TV does not launch the voice control field when
press Google Assistant™, pairing was unsuccessful.
4 - It is advisable to wait until the set has fully started up
and launched all background processes before pairing
mode is entered as the toast message containing further
instructions may appear too late, thereby negatively
impacting the pairing procedure.
Pairing again
If the pairing with the remote control was lost, you can
pair the TV with the remote control again.
You can press Home + Back key or long press the PAIR
(SOURCES) key (approximate for 3 seconds) for pairing.

3.2. Voice Search

You can search for videos, music or anything else on the
Internet by simply using your voice. You can speak into
the microphone on the remote control.
You need to pair the remote control to the TV before use
voice search.
To use Voice...
1 - Press Google Assistant™ on remote control, the blue
light on the remote control lights up and the search field
opens, the microphone is active.
2 - Speak out what you are looking for with clear
pronunciation. You can speak for 10 seconds before the
microphone switches off. It might take some time for the
results to appear.
3 - In the list of search results, you can select the item you
want.

3.3. IR Sensor

The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use such
a remote control, always make sure you point the remote
control at the infrared sensor on the front of the TV.
Warning
Do not put any objects in front of IR sensor of the TV, it
may block the IR signal.
9