Radarsign TC-800 Instruction Manual
Radar speed sign
Hide thumbs
Also See for TC-800:
- Operation manual (15 pages) ,
- Installation manual (16 pages) ,
- Installation manual (15 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Radarsign TC-800
Summary of Contents for Radarsign TC-800
- Page 1 1 of 17 TC-800 | TC-1100 Radar Speed Sign Installation Manual MN0035 v24.01...
-
Page 2: Table Of Contents
Customer Resource Center pg. 16 Radarsign Warranty pg. 17 Radarsign, LLC reserves the right to change the specifications without notice. Contact our sales department for special applications and configurations. © 2005-2024 Radarsign, LLC 2 of 17 TC-800 | TC-1100 Radar Speed Sign Installation Manual MN0035 v24.01... -
Page 3: Safety Warnings
To avoid the possibility of injury due to falling or unstable equipment: Be certain the radar speed sign is mounted to an appropriately rated pole or equivalent mounting surface. Use appropriately rated mounting hardware. 3 of 17 TC-800 | TC-1100 Radar Speed Sign Installation Manual MN0035 v24.01... -
Page 4: Best Practices Prior To Radar Speed Sign Installation
A radar speed signal cannot “curve” with the road, and will not display speeds with enough time for drivers to see the alert and adjust their speed. 4 of 17 TC-800 | TC-1100 Radar Speed Sign Installation Manual MN0035 v24.01... - Page 5 3°- 4° downward to detect vehicles. Doing so will greatly reduce the length of time vehicles are detected and will display speeds that are LOWER than the actual speed. 5 of 17 TC-800 | TC-1100 Radar Speed Sign Installation Manual MN0035 v24.01...
-
Page 6: Pole And Base Options
POLE OPTIONS Radarsign does not recommend specific poles or hardware due to varying weather and terrain conditions. Users are responsible for choosing and installing a pole size that provides adequate support for the sign. Please check your local/city/county code requirements. -
Page 7: Installing And Positioning The Radar Speed Sign
Pivot Mounting Bracket Installation slot A pivot mounting bracket kit is standard with the purchase of the TC-800 and TC-1100 models. The bracket kit includes the pole bracket and the sign installation hardware. The notable feature is that the housing bracket is already integrated into the back of the radar speed sign housing, simplifying the installation process as only the pole bracket needs to be installed separately. -
Page 8: Mounting The Batteries To A Solar Radar Speed Sign
Be cautious not to over-tighten. • Carefully screw down the bolt until the battery housing is secure and no longer requires external support to stay in • place. 8 of 17 TC-800 | TC-1100 Radar Speed Sign Installation Manual MN0035 v24.01... -
Page 9: Best Practices For Installation Of Solar Panels
Ensure that the end with round holes located farthest from the pole is oriented upward. This positioning allows sufficient space for pivoting the larger bracket without obstructing the banding clamps. 9 of 17 TC-800 | TC-1100 Radar Speed Sign Installation Manual MN0035 v24.01... -
Page 10: Installing A Solar Panel On A Large Fixed Bracket
Position the bracket on the pole at desired position with the solar panel facing as close to south as possible at a • 45° angle and secure to pole. Tighten all nuts on mounting bracket and solar panel. • 10 of 17 TC-800 | TC-1100 Radar Speed Sign Installation Manual MN0035 v24.01... -
Page 11: Installing A Solar Panel On A Large Adjustable Bracket
• resistance on the solar panel. The brackets come equipped with pre-drilled slots designed for easy mounting on 4½” diameter poles. Radarsign • includes two banding clamps tailored to fit 4½” diameter poles. Should you opt to install the brackets on a larger pole, utilize the slots on the main support bracket mount and use suitable size banding clamps. -
Page 12: Making The Solar Power Connections
Periodically inspect the installation to check for any signs of tampering or loosening. Promptly address and rectify • any issues to maintain the security of the conduit. 12 of 17 TC-800 | TC-1100 Radar Speed Sign Installation Manual MN0035 v24.01... - Page 13 NEUTRAL incoming wires. This implies that the device does not have polarity-sensitive connections. Reinstallation: After making the necessary connections, reinstall the gang box cover • plate using the supplied screws. This ensures the housing is securely closed. 13 of 17 TC-800 | TC-1100 Radar Speed Sign Installation Manual MN0035 v24.01...
- Page 14 • sign housing ledge Carefully screw down the bolt until the battery /AC housings are secure and no • longer requires external support to stay in place. 14 of 17 TC-800 | TC-1100 Radar Speed Sign Installation Manual MN0035 v24.01...
-
Page 15: Installing The Your Speed Faceplate
TC-800 YOUR SPEED Faceplate secured to sign housing The TC-800 YOUR SPEED faceplate is a wrap around design. Slide the faceplate • over the front of the radar speed sign, Align the holes in the faceplate with the holes in the side of the radar speed sign •... -
Page 16: Radar Speed Sign Settings
1220 Kennestone Circle, Suite 130 Marietta, GA 30066 Sales Information: Call 678-965-4814 or email info@radarsign.com RMA Instructions: Please make sure to fill out and submit an RMA Request form with all returns. 16 of 17 TC-800 | TC-1100 Radar Speed Sign Installation Manual MN0035 v24.01... -
Page 17: Radarsign Warranty
LIMITED PRODUCT WARRANTY Radarsign, LLC (‘we” or “us” or “our”) warrants that our traffic calming system (“Product”) is new and free from defects in materials and workmanship to the original purchaser (end user) (“Purchaser”) (the “Product Warranty”) for a period of two (2) years from the date of shipment (“Warranty Period”), regardless of whether such Product was purchased from us or by one of our authorized distribu-...