Setting The Pump - 2E -CJSPBPL-BK User Manual

7. Setting the pump

1. Car tire inflation: press the ON/OFF switch to turn on the device, then press
the M key to enter the car tire inflation menu bar, the default value is 2.5 bar,
press the +/- button to increase or decrease the set value of automatic stop.
The vehicle tire inflation setting can be adjusted to recommended pressures to
inflate motorcycle tires.
2. Bicycle tire inflation: press the ON/OFF switch to turn on the device, then
press M twice to enter the bicycle tire inflation menu bar, the default value is
2.5 bar, then press the +/- buttons to increase or decrease the set value of
automatic stop.
3. Ball inflation: press the ON/OFF button to turn on the device, then press
the M button three times to enter the menu bar of the inflation ball, the default
value is 0.3 bar, press the +/- buttons to increase or decrease the set value of
automatic stop.
4. Air pressure unit setting: press the ON/OFF switch to turn on the device, then
press the M key four times to enter the air pressure unit setting menu bar, press
+/- to switch the air pressure unit to BAR or PSI respectively.
5. After completing the above settings, press M again to exit.
8. Warning
1. Before using this product, please read and understand the operating
instructions carefully. When charging, use the dedicated charger and charge
it according to the instructions. Charging with constant current and constant
voltage. Reverse charge prohibited.
3. This product has built-in high-quality long-lasting batteries, no memory
effect, large capacity (recommended storage temperature -20 to 60C).
4. For long term storage, please charge the product every 3-6 months to
prolong battery life.
5. This device has a built-in non-removable battery. Do not attempt to remove
the battery to avoid damaging the equipment.
6. The charger and this product become slightly warm during charging, which is
normal.
7. Please keep this product away from fire, water and other liquids. Avoid
prolonged exposure to direct sunlight.
8. Do not short-circuit the contacts of the product, do not store the product
together with coins, jewelry, keys and other metal objects.
9. This product has a built-in high voltage power supply, non-professional
personnel should not attempt to disassemble the product to avoid accidents.
10. At the end of battery life, please do not dispose of this product with
household waste, so as not to harm the environment. Please dispose of used
batteries in accordance with local laws and regulations.
EN 9