Table Of Contents - X10 VK70A Owner's Manual

I
NTRODUCTION
Your Wireless Camera Kit consists of a Wide Angle Color Video Camera
with built-in 2.4 GHz Transmitter, and a Video Receiver which you connect
to a TV anywhere in your home (up to 100 ft. away from the Camera). The
Camera converts video signals into radio signals and transmits them (even
through walls) to the Video Receiver. The Receiver converts the signals
back to video signals and feeds them through a cable to your TV's Video
input jack.
Also included is a remote controlled power supply, Model XM13A, which
lets you turn the camera on and off by remote control from any X10 remote
control (sold separately). You can purchase additional cameras and power
supplies so you can have a multiple camera system. You can then set all
cameras to the same channel as the receiver and turn the cameras on and
off remotely so as to only ever have one camera turned on at a time.
FCC C
AUTION
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
This equipment generates and uses radio frequency energy, and if not installed and used
properly, that is, in strict accordance with the manufacturers instructions, it may cause
interference to radio and television reception. It has been type tested and found to comply
with the limits for remote control devices in accordance with the specifications in Sub-Parts
B and C of Part 15 of FCC Rules, which are designed to provide reasonable protection
against such interference in a residential installation. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
interference to radio or television reception, which can be determined by unplugging the
equipment, try to correct the interference by one or more of the following measures.
• Reorient the antenna of the radio/TV experiencing the interference.
• Relocate the equipment with respect to the radio/TV.
• Move the equipment away from the radio/TV.
• Plug the equipment into an outlet on a different electrical circuit from the radio/TV
experiencing the interference.
• If necessary, consult your local Dealer for additional suggestions.
NOTE: Modifications to this product will void the user's authority to operate this
equipment.
2 2 2 2 2
C
ONTENTS
C C
........................................................ 4
ONTROLS AND ONNECTIONS
V R ..............................................................................4
IDEO ECEIVER
C .......................................................................................... 5
AMERA
C U
................................................................................ 6
ONNECTING P
S C P
ETTING UP THE AMERA AND OWER
S V R ..................................................... 7
ETTING UP THE IDEO ECEIVER
F S
............................................................... 8
INE TUNING YOUR YSTEM
T
........................................................................... 9
ROUBLESHOOTING
W
...................................................................................... 11
ARRANTY
3 3 3 3 3
S ................................... 6
UPPLY