Roubleshooting - X10 SUPERREMOTE UR19A Owner's Manual

Use a controller to trigger the
Remote Chime Module SC546 to
call Dad up for dinner, or warn
people you're about to turn on the
Fit a Wireless Wall Switch
RW724 anywhere you need an
extra switch - with no wires. Sends
commands to the Transceiver
Module just like a remote.
Use the isolated contacts on the
Universal Module UM506 to
control pool pumps, sprinklers,
drapes and other low voltage
equipment. Includes built in
warning beeper.
Switch entrance or garage lights on
from your car with the convenient
Keychain Remote KC674.
The PowerFlash Module PF284
connects to dry contact or low
voltage alarm terminals on your
burglar alarm system and flashes
X-10 controlled lights when it is
Plug in a Heavy Duty Module
HD245 to control 220V appliances
such as air conditioners and water
heaters.
sprinklers.
triggered.
30
T

ROUBLESHOOTING

The Transceiver Module doesn't respond
to the remote:
• Check the House Code on the
Transceiver Module is set to 'A.' If
you have changed the House Code
on the remote (see p. 27), check that
it matches the House Code on the
module.
• Press the ON/OFF button on the front
of the Transceiver to confirm it
operates the equipment connected to
it.
The Transceiver Module works, but
other modules don't respond:
• Check that the Module has the same
House Code as the Transceiver
Module.
• Try plugging the Module into a
different outlet.
Note: if you use an RF Transceiver (such
as the RR501 or TM751) to control X-10
Modules, you will be able to control up
to 16 Modules. With a Transceiver,
when you press 1-6-ON you turn on
Module number 16. However, if you use
an IR543, when you press 1-6-ON you
turn on Modules 1 AND 6. The IR543
can only control 10 Modules (1-9 plus
0=10).
The Remote won't control your A/V
equipment, or doesn't work at all:
• Use manual controls or the original
remote control to confirm the
equipment is working properly.
• Be sure you pressed the device key
for the device you want to control.
• Re-enter the code for your A/V
product from the code listings on
pages 12 through 21.
• Try searching for codes as described
on page 23.
• Replace the Remote's batteries.
31