Advertisement
Dehumidifier
40 Pint and 50 Pint
SKU: HME021005N
SKU: HME021006N
Thank you for purchasing our
appliance. Please be sure to read
the entirety of this user manual
carefully prior to using this
appliance. If you have any questions
regarding the use of this product,
please contact Customer Service
at homelabs.com/help
or help@homelabs.com.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for homelabs HME021005N
Summary of Contents for homelabs HME021005N
- Page 1 Dehumidifier 40 Pint and 50 Pint SKU: HME021005N SKU: HME021006N Thank you for purchasing our appliance. Please be sure to read the entirety of this user manual carefully prior to using this appliance. If you have any questions regarding the use of this product, please contact Customer Service at homelabs.com/help...
-
Page 2: Table Of Contents
Failure to keep the product in its original quality from the time of receipt may impede hOmeLabs’s ability to correct any legitimate problem and may limit the extent to which hOmeLabs may provide recourse. -
Page 3: Important Safety Instructions
important safety instructions WARNING • This appliance is not intended for use by persons (including children) with reduced physical, • This appliance is for household use only. sensory or mental capabilities, or lack of experience and knowledge, unless they have been •... - Page 4 Tooling names Use requirement INFORMATION FOR QUALIFICATION OF WORKERS Small vacuum Explosion-proof vacuum pump: ensure a certain accuracy, vacuum degree All operators or refrigeration system maintenance personnel shall have a valid certificate issued by an industry-recognized evaluation body to certify that they are qualified for the safe disposal pump should be less than 10 Pa.
- Page 5 • Start the recovery machine and operate in accordance with manufacturer’s instructions. • Do not overfill cylinders. (No more than 80% volume liquid charge). NOTE: The use of silicon sealant may inhibit the effectiveness of some types of leak detection equipment. Intrinsically safe components do not have to be isolated prior to •...
-
Page 6: Installation
Installation Presence of fire extinguisher If any hot work is to be conducted on the refrigeration equipment or any associated parts, propriate fire extinguishing equipment shall be available to hand. Have a dry powder or CO₂ fire extinguisher adjacent to the charging area. ACCESSORIES No ignition sources No person carrying out work in relation to a refrigeration system which involves exposing any... -
Page 7: Operating Instructions
Installation Operating Instructions CONTROL PANEL Use the Hooking Strip When you use Dehumidifier, open the Hooking Strip at the back of the Dehumidifier to tie up the Power Cord. When you do not use the Dehumidifier, Power Cord can also be tied up by Hooking Strip again and fasten into the hole. - Page 8 Operating Instructions Operating Instructions “ Timer ” button NOTE This timer can be used to delay the appliance start-up or shutdown, this avoids wasting electricity by optimizing operating periods. • Hold the Bucket with both hands when emptying the Bucket. •...
-
Page 9: Cleaning And Maintenance
Operating Instructions Cleaning and Maintenance END OF SEASON OPERATIONS • Unplug the unit from the outlet, empty the Bucket and remove the drain cap. • Run off all water left inside the appliance. When all the water has been drained, put the cap back in place. -
Page 10: Warranty
These are our general terms for warranty service, but we always urge our customers to reach out to us with any issue, regardless of warranty terms. If you have an issue with a hOmeLabs product, Temperature Temperature sensor is damaged. - Page 11 For Household Use Only Distributed by hOmeLabs™, LLC 350 Springfield Avenue, Suite #200, Summit, NJ 07901 help@homelabs.com homelabs.com/help All rights reserved, hOmeLabs™. Made in China.
Need help?
Do you have a question about the HME021005N and is the answer not in the manual?
Questions and answers
we plug it in, light appears on the pump. shows 49% but actual humidity in the basement is 60%. The unit does not start. What is wrong?
The homelabs HME021005N dehumidifier may not start if the humidity level set on the unit is higher than or equal to the current room humidity. If the unit shows 49% humidity but the actual humidity is 60%, possible causes include:
1. Humidity sensor malfunction – The unit may be reading the humidity incorrectly.
2. Poor air circulation – If placed in a closet or enclosed area without proper airflow, it may give inaccurate readings and not function correctly.
3. Ambient temperature too high – If the temperature is above 89.6°F, the unit may display an error (e.g., “E3”) and not operate.
4. Full or incorrectly installed bucket – If the water bucket is full or not properly placed, the unit will stop running.
5. Improper drain pipe installation – If the drain pipe is blocked or not installed correctly, the unit may stop and show a full bucket warning.
Check sensor accuracy, airflow, bucket status, temperature, and drain setup.
This answer is automatically generated
we plug it in, light appears on the pump. shows 49% but actual humidity in the basement is 60%. The unit does not start. What is wrong?
If the homelabs HME021005N dehumidifier shows 49% humidity but the actual humidity is 60% and it does not start, possible issues include:
1. Poor air circulation, especially if placed in an enclosed area like a closet.
2. The ambient temperature may be above 89.6°F, which can trigger an error (“E3”) and prevent the unit from running.
3. The humidity setting might be set below the actual room humidity, causing the unit to remain off.
4. The Bucket may be full or not installed correctly, stopping operation.
5. The Drain Hose may be blocked or incorrectly installed, especially if using Pump Drain.
Check ambient temperature, bucket status, drain setup, and ensure proper air circulation.
This answer is automatically generated