Table of Contents
Advertisement
Quick Links
Commercial
Dehumidifier
160 PPD (HME021007N)
140 PPD (HME020437N)
SKU: HME021007N
SKU: HME020437N
Thank you for purchasing
our appliance. Please be sure
to read the entirety of this
user manual carefully prior
to using this appliance. If you
have any questions regarding
the use of this product,
please call 1-(800)-898-3002.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for homelabs 160 PPD
Summary of Contents for homelabs 160 PPD
- Page 1 Commercial Dehumidifier 160 PPD (HME021007N) 140 PPD (HME020437N) SKU: HME021007N SKU: HME020437N Thank you for purchasing our appliance. Please be sure to read the entirety of this user manual carefully prior to using this appliance. If you have any questions regarding the use of this product, please call 1-(800)-898-3002.
-
Page 2: Table Of Contents
Failure to keep the product in its original quality from the time of receipt may impede hOmeLabs’s ability to correct any legitimate problem and may limit the extent to which hOmeLabs may provide recourse. - Page 3 • Always operate the unit from a power source of equal voltage, frequency and rating as indicated on the product identification plate. • Always use a power outlet that is grounded. • Unplug the power cord when cleaning or when not in use. PRODUCT DESCRIPTION •...
-
Page 4: Installation
Installation 5. CHECKING FOR PRESENCE OF REFRIGERANT The area shall be checked with an appropriate refrigerant detector prior to and during work, to ensure the technician is aware of potentially flammable atmospheres. Ensure that the leak detection equipment being used is suitable for use with flammable refrigerants, ACCESSORIES i.e. -
Page 5: Operation
Installation Operation PARTS OVERVIEW NOTE: READ BEFORE FIRST USE (See page 5) before following these steps. 1. Place the device on its front side. 2. Mount the Handle (2) to the device sides using Screws (3). The hole sites must be aligned on both sides. Handle Mounting the Casters Control Panel... - Page 6 Operation Operation To Set the Humidity Level POSITIONING THE APPLIANCE The default set humidity level is 50% RH. To adjust the humidity level, press and hold the “Increase” or “Decrease” button. The humidity level can be increased or decreased by increments of 5% RH in normal mode. more than 11.8 in (30 cm) •...
-
Page 7: Cleaning And Maintenance
Operation Specifications Protection Codes Voltage & Frequency AC 115 V, 60 Hz FL - The water full switch sensor failed or the Water Pump failed. 45 Pints / Day @ 65°F, 60% RH NOTE: When one of the above malfunctions occurs, turn off the Dehumidifier, and check 70 Pints / Day @ 80°F, 60% RH for any obstructions. -
Page 8: Troubleshooting
If you have an issue with a hOmeLabs • There is a kerosene heater or • Remove the objects giving off product, please contact us at 1-(800)-898-300, and we will do our best to resolve it for you. - Page 9 Distributed by hOmeLabs™, LLC 37 East 18 Street, 7th Floor New York, USA 10003 help@homelabs.com homelabs.com/help All rights reserved, hOmeLabs™ Made in China.
Need help?
Do you have a question about the 160 PPD and is the answer not in the manual?
Questions and answers