Download Print this page

X10 Mini Timer MT10A Owner's Manual

X10 mt10a home automation system: owners manual
Hide thumbs

Advertisement

Mini Timer
Owner's Manual
Mini Timer MT10A

Advertisement

loading

  Related Manuals for X10 Mini Timer MT10A

  Summary of Contents for X10 Mini Timer MT10A

  • Page 1 Mini Timer Owner's Manual Mini Timer MT10A...
  • Page 2: Table Of Contents

    Before you begin Keep in mind that your X10 System will always turn lamps and appliances on or off the instant you press the buttons. That’s obvious - but there can be some unexpected consequences.
  • Page 3: Introduction

    The Mini Timer plugs into any AC outlet in your home and transmits digitally encoded signals over your house wiring instantly or at the times you set. These signals are received by the X10 Modules. You Plug a lamp up to 300 watts into a Lamp Module, an appliance such as a TV, stereo or coffee pot into an Appliance Module and replace important indoor or outdoor security lights up to 500 watts with the Wall Switch Module.
  • Page 4: How To Program A Timed Event

    Follow the steps below to make sure you can control your Modules before you program the Mini Timer. 1.Install and set up all of your X10 Modules referring to the instructions included with them. Be sure to turn off the power at the main circuit breaker panel when installing Wall Switch Modules.
  • Page 5: Programming On And Off Times

    Housecode as Mini Timer), press the “All Lights On” key. This key does not affect appliances. To turn off ALL lights AND appliances connected to any kind of X10 Module (with same Housecode as Mini Timer), including Appliance Modules, press the “All Units Off”...
  • Page 6: Setting A Timed Event To Occur In The 'Security' Mode

    Programming ON and OFF times Setting a timed event to occur in the “Security” mode If you advance to a specific time, and then press one of the ON or OFF rocker keys, you will set an on or off time for that Unit Code to occur every day at exactly the same time. If however, you press the “Security”...
  • Page 7: Alarm Settings

    Alarm settings Setting the Alarm Buzzer With the “Buzzer” switch in the “ON” position, any program you set for Module number 1 (or Module number 5 if the Selector switch is set to 5-8) will also set the internal alarm buzzer.
  • Page 8: Troubleshooting

    9-16 Modules A wide range of switch and control modules are available from X10, all of which can be controlled from the Mini Timer. Modules available include replacement wall switches, X10 controlled AC outlets, screw-in lamp modules, plug-in lamp and appliance modules and many others.
  • Page 9 X10 WARRANTS ITS PRODUCTS TO BE FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP FOR A PERIOD OF ONE (1) YEAR FROM THE ORIGINAL DATE OF PURCHASE AT RETAIL. X10 AGREES TO REPAIR OR REPLACE, AT ITS SOLE DISCRETION, A DEFECTIVE X10 PRODUCT IF RETURNED TO X10 WITHIN THE WARRANTY PERIOD AND WITH PROOF OF PURCHASE.