Samsung CW21Z413NCXXEC Service Manual page 39

Part Name
Chassis
① Separate the 7P, 8P Wire connecting the DY Wire and the
Holder
CRT PCB.
② To separate the Wire, Fixing clip and pressing the Wire.
① Remove the CRT.
② Separate the TBC Wire,GND,VM cables from the CRT Ass'y.
(GND, VM, Tilt Model by option)
Notice: : When take off VM,Tilt cable from CRT PCB, don't
touch PIN in CRT electric gun.
① Separate the cables connecting the FBT and the CRT.
Notice: Since there may be a remaining high-voltage current
within the CRT, take care not to touch the CRT hole with metal
or a part of yourself when separating the cables.
Samsung Electronics
Description
Disassembly & Reassembly
Description Photo
12-3