Table of Contents
Advertisement
The problem
The TV audio is not being played
through the AV receiver.
The sound is not heard clearly.
The volume of the external device
cannot be adjusted.
I want to turn off and on the TV
and audio device at the same
time.
Check the A/V receiver's power supply and its settings.
•
When connecting the optical cable between the TV and A/V receiver, make sure
that the sound output is set
•
In case of HDMI-eARC connection, make sure that it is connected to the eARC
dedicated HDMI port on your TV. However, the eARC can be used only when the
A/V receiver supports the eARC feature.
Change to an appropriate sound mode.
•
Settings
When
Intelligent Mode
and
automatically adjusted to the surroundings.
•
Settings
This function may not be supported depending on the model.
To optimise the sound depending on the surroundings, select
•
Settings
This function may not be supported depending on the model.
Check the cable connection between the TV and the external device.
When connecting an external speaker such as home theatre via HDMI, make sure it is
connected to the HDMI (eARC) port on the TV. Make sure that the
General
External Device Manager
When you connect the Samsung Soundbar to the TV via Bluetooth, the power turns off
and on together. It may not be supported depending on the Samsung Soundbar
model.
When you connect an audio device that supports HDMI-eARC to the HDMI (eARC) port
on the TV, the power turns off and on together.
- 192 -
Try this!
Optical
on your TV.
Sound
Sound Mode
Adaptive Sound+
are turned on, the sound effects are
General
Intelligent Mode Settings
General
Intelligent Mode Settings
Anynet+ (HDMI-CEC)
Intelligent Mode
Adaptive
Sound+.
Adaptive Sound+
Settings
is active on your TV.
Advertisement
Table of Contents
