Table of Contents
Advertisement
AV-29WS3
Measuring
Item
instrument
Adjustment
Signal
of
generator
SIDE PIN
Remote
control unit
Adjustment
Signal
of
generator
TRAPEZIUM
Remote
control unit
Signal
Adjustment
of
generator
CORNER
Remote
control unit
32
Test point
Adjustment part
7. EW-PIN
Straight
8. EW-TRAPEZ
Parallel
9. UP CORNER
10. DW CORNER
13. Receive a PAL cross-hatch signal.
14 Select 7. EW-PIN with the MENU &/^ key.
15. Set the initial setting value of 7. EW-PIN with the MENU */Tkey.
16. Adjust 7. EW-PIN so that the first vertical lines at the left and right
edges on the screen are straight.
17. Select 8. EW-TRAPEZ with the MENU &/^ key.
18. Set the initial setting value of 8. EW-TRAPEZ with the MENU
*/Tkey.
19. Adjust 8. EW-TRAPEZ so that the vertical lines at the left and right
edges on the screen are in parallel.
20. Select 9. UP CORNER with the MENU &/^ key.
21. Set the initial setting value of 9. UP CORNER with the MENU
*/Tkey.
22. Select 10. DW CORNER with the MENU &/^ key.
23. Set the initial setting value of 10. DW CORNER with the MENU
*/Tkey.
24. Adjust 9. UP CORNER and 10. DW CORNER so that the vertical
lines at the four corners on the screen are straight.
25. Press the DISPLAY key twice to return to the normal screen.
No. 52081
Description
Advertisement
Chapters
Table of Contents
