Nevir NVR-7417-32HD-N User Manual page 86

3. When you success to set the record task，if the TV is standby mode，it will auto power on
when three minutes before the start of the task。
4. When the record task time is start ， It will auto record ， but you must check you USB
storage device inserted and it is enough speed to record。Otherwise the task will failure。
5. The TV enter false standby mode when the task is start，you can press the "POWER" key
to watch the TV program。You can do same operation as Direct Record. When you press
"POWER" again ， if the task is not over ，the TV will power off the panel and continue to
record。The TV will real power off until the record task is over。
6. When you open the EPG menu, press the BLUE button, you can enter the programmer
time menu too。
34