Connecting To Tv-Signal Input - Nevir NVR-7417-32HD-N User Manual

1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit
and connect the other end to the PC.
2. Connect one end of the audio cable to the PC audio input jack on the rear panel of the
unit and connect the other end to the PC audio output jack.
After connection, turn on the power of the unit and the external AV signal source and use the
SOURCE and the direction buttons to select VGA mode, and then press the ENTER button
to confirm.

4.8 Connecting to TV-Signal Input

Connect the TV signal cable (the antenna cable, for example) to the antenna input jack on
the back of the unit so that you can receive television programmers.
After connection, turn on the power of unit. Then press the SOURCE button to select ATV or
DTV mode and conduct program selection.
10