CONTENTS CONTENTS SAFETY INFORMATION ................... 4 IN THE BOX ........................7 PRODUCT DIAGRAM ....................7 INSTRUCTIONS FOR ASSEMBLY ................ 8 INSTRUCTIONS FOR USE ..................8 MAINTENANCE ......................9 STORAGE ........................9 TROUBLESHOOTING ....................10 SPECIFICATIONS: Voltage Rating: 120 V (60Hz) 12.5 Amps Power Consumption: 1500W IMPORTANT NOTE: Read the manual carefully.
SAFETY & PRECAUTIONS SAFETY INFORMATION CONTINUED CONTINUED WARNING Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could result in fire, electric shock, or serious personal injury. IMPORTANT INSTRUCTIONS When using this electric unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:...
Page 5
SAFETY INFORMATION (Continued) 15. To avoid fire or shock hazard, plug the unit directly into a 120 V AC electrical outlet. 16. To prevent overloading a circuit, do not plug the heater into a circuit that already has other appliances working. 17.
Page 6
SAFETY & PRECAUTIONS SAFETY INFORMATION CONTINUED CONTINUED (Continued) TIP-OVER SAFETY FEATURE This heater is equipped with a shut-off safety feature. Once the heater is tipped over, an internal switch will automatically shut the heater off. Once the heater is restored to an upright position, the heater will reset. OVERHEAT SAFETY FEATURE This heater is equipped with an overheat safety feature.
IN THE BOX MILK HOUSE HEATER • 1 X TOP HANDLE • OWNER’S MANUAL PRODUCT DIAGRAM Top Handle Top Handle Screw Hot Air Outlet Front Handle Power Switch Thermostat Knob Assembled Back Handle...
SAFETY & PRECAUTIONS INSTRUCTIONS FOR ASSEMBLY CONTINUED CONTINUED Place the product on a firm, level surface. Remove 2 screws on top using a phillips screwdriver. Place the handle on top, align with holes and secure with screws. INSTRUCTIONS FOR USE Place the product on a firm, level surface.
MAINTENANCE Turn the POWER THERMOSTAT to the OFF position. Unplug the unit and let it cool completely. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. A mild detergent can be used if necessary. After cleaning, dry the unit with a soft cloth.
SAFETY & PRECAUTIONS TROUBLESHOOTING CONTINUED CONTINUED If the heater will not operate, please check the following: Check if the power cord is plugged into an electrical outlet. If not, plug in unit to appropriate outlet. Check if electricity to the outlet is working. Ensure power is turned to ON position.
Page 12
5401 Dansher Road Countryside, IL 60525 844-4PA-AIRE 844-472-2473 support@perfectaire.us 877-997-2473 supportcanada@perfectaire.us CANADA SUPPORT www.perfectaire.us Printed in China 0522_M899...