Perfect Aire 1PHCF14 User Manual

Perfect Aire 1PHCF14 User Manual

Oscillating parabolic heater

Advertisement

USER MANUAL
FOR MODEL:
1PHCF14
OSCILLATING PARABOLIC
HEATER
Before using your oscillating parabolic heater
please read this manual carefully and keep
it for future reference, along with your receipt.

Advertisement

Table of Contents
loading

Summary of Contents for Perfect Aire 1PHCF14

  • Page 1 OSCILLATING PARABOLIC HEATER USER MANUAL FOR MODEL: 1PHCF14 Before using your oscillating parabolic heater please read this manual carefully and keep it for future reference, along with your receipt.
  • Page 3: Important Instructions

    Thank you for choosing our Dish Heater. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new heater. IMPORTANT INSTRUCTIONS When using this electric unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:...
  • Page 4: Specifications

    14. To avoid fire or shock hazard, plug the unit directly into a 120 V AC electrical outlet. 15. To disconnect heater, turn controls to OFF, then remove plug from outlet. Pull firmly on the plug, DO NOT unplug by pulling on the cord. 16.
  • Page 5: Product Diagram

    WARNING: It is normal for the power cord to feel warm to the touch; however, a loose fit between the outlet and the plug may cause overheating of the plug. If this occurs, try inserting the plug into a different outlet. Contact a qualified electrician to inspect the original outlet for damage.
  • Page 6 Control Panel 1. Power Off 2. OSC &Low heat setting 3. OSC &High heat setting 4. Low heat setting 5. High heat setting 6.Timer knob 7.Timer Off 8.Timer normal open PREPARATION Place the heater on a firm, level surface and plug directly into a grounded 120V 60Hz power outlet.
  • Page 7: Operating Your Heater

    OPERATING YOUR HEATER 1. Turn the power knob to the desired heat setting. (Timer must be set in ON position). LOW: heating up to 400W HIGH: heating up to 800W OSC. LOW: heater will rotate left to right, and heat up to 400W OSC.
  • Page 8 Distributed by: Perfect Aire, LLC 5401 Dansher Rd. Countryside, IL 60525 844-4PA-AIRE | 844-472-2473 www.perfectaire.us PA/User_1PHCF14/05102019 Specification and performance data is subject to change without notice. Printed in China...

Table of Contents