Table of Contents
Advertisement
Available languages
Available languages
E
MERGENCY OPERATION
When the remote controller
cannot be used...
Emergency operation can be activated by pressing the
emergency operation switch (E.O. SW) on the indoor unit.
Each time the E.O. SW is pressed,
the operation changes in the following
order:
Operation indicator lamp
<KT09/13/15/18>
Emergency COOL
Set temperature : 24°C
Fan speed : Medium
Horizontal vane : Auto
Note:
The first 30 minutes of operation is test run. Tempera-
ture control does not work, and fan speed is set to High.
A
UTO RESTART FUNCTION
If a power failure occurs or the main power is turned off
during operation, "Auto restart function" automatically
starts operation in the same mode as the one set with
the remote controller just before the shutoff of the main
power. When timer is set, timer setting is cancelled and
the unit starts operation when power is resumed.
If you do not want to use this function, please consult
the service representative because the setting of the
unit needs to be changed.
www.ttair.co.th | Tel : 02-385-0728 | E-mail : sales@ttair.co.th | LINE ID : @ttair
<KT24>
Stop
En-10
Advertisement
Table of Contents
