Table of Contents
Advertisement
[Replacing the battery pack]
Renew the battery pack if it discharges within an extremely short time. Make
sure you use the specified replacement battery pack (Epson Model C20RB).
1) Turn off the POWER
switch.
2) Remove the five screws retaining the upper cover to the bottom cover and
remove the upper cover.
3) Disconnect the battery connector and remove the battery pack. Install the
new battery pack and attach the battery connector in the correct direction.
4) Replace the upper cover.
NOTES:
© Make sure you turn off the POWER
switch.
¢ Do not disassemble the battery pack.
© Hold the connector body not the lead, when disconnecting the battery connector.
* Do not short circuit the battery pack terminals.
* Do not incinerate used battery packs.
Advertisement
Table of Contents
