Care And Cleaning - Kenwood MWL311 Instructions Manual

care and cleaning

Turn the oven off and remove the plug from the
socket before cleaning.
Keep the inside of the oven clean by wiping with a
damp cloth. If the oven is heavily soiled a mild
detergent solution may be used. Do not use harsh or
aggressive detergents as this will damage the oven.
Do not use a knife or any other form of scraper to
remove food residues from this oven.
The outside of the oven can be cleaned with a soft
damp cloth. Dry thoroughly.
Keep the control panel free from too much moisture.
Clean it with a soft damp cloth only and do not use
detergents or abrasives. Dry thoroughly.
If condensation accumulates inside or around the
outside of the oven door, wipe it clean with a damp
cloth and dry thoroughly. Condensation is quite
normal and forms when moisture is present during
cooking.
Ensure the door seals and adjacent parts are kept
clean by wiping with a damp cloth. If the door seals
or adjacent parts become dirty wash with warm
soapy water; then rinse & dry. If the door seal is
damaged in any way the oven must not be used until
it has been repaired by a Kenwood Authorised
Repairer.
It is occasionally necessary to remove the glass tray
for cleaning. Wash the tray in warm soapy water, then
rinse and dry thoroughly.
The roller ring and bottom surface of the oven should
be cleaned regularly to avoid excessive noise. Simply
wipe the bottom surface of the oven using a mild
detergent and dry thoroughly with a soft cloth. The
roller ring may be washed in mild soapy water, rinsed
and dried thoroughly. Be sure to replace the roller ring
in the correct position.
Remove odours from your oven by combining a cup
of water with the juice and rind of a lemon in a deep
microwaveable bowl. Microwave for 1
then wipe the inside of the oven with a dry cloth.
Inspect the oven regularly for signs of corrosion -
particularly around the door. If you find any signs of
corrosion, arrange for the appliance to be serviced.
For safety reasons the oven light should only be
replaced by a Kenwood Authorised Repairer.
service
If the oven or supply cord are damaged in any way, or it
is necessary to replace the oven light, or repair the oven,
the work must, for safety reasons, be carried out by
Kenwood or a Kenwood Authorised Repairer.
IMPORTANT INFORMATION FOR CORRECT
DISPOSAL OF THE PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE 2012/19/EU.
At the end of its working life, the product must not be
disposed of as urban waste.
It must be taken to a special local authority differentiated
waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids
possible negative consequences for the environment
⁄ minutes and
1
2
and health deriving from inappropriate disposal and
enables the constituent materials to be recovered to
obtain significant savings in energy and resources. As a
reminder of the need to dispose of household
appliances separately, the product is marked with a
crossed-out wheeled dustbin.
16
before you call for assistance please check
the following:
If the oven will not work at all and the display does
not appear, or disappears - check that the oven is
plugged in and switched on. If it is, switch it off and
check that the fuse in the plug or fuseboard is OK. If
necessary try the appliance in a different socket.
If the microwave will not function, check to see
whether the timer is set. Also check that the door is
properly shut so that the safety interlocks are fully
engaged. If they are not, the oven will not work.
Check to see that the child-proof lock is not on the
display. If it is, switch it off.
If none of the above actions rectify the
situation, contact:
The shop where you bought the microwave - they will
advise you.
14