Philips RC 248 Operating Instructions Manual page 8

oneey sHear
- na
( TUNING TO A STATION
Briefly press the BND key fo select the desired waveband:
FM1, FM2, FM3, MW1*, MW2*, LW*
[2] Tune to a radio station using:
Search tuning; Manual tuning; Recalling a preset station; or Auto-Store.
SEARCH TUNING (to quickly search for a station)
[Briefly press the m- key (higher frequency) or ~« key {lower frequency).
[2]To search for another station, press the same key again.
@ LOCAL / DISTANT (influences search tuning on FM)
* Press the LOC key for at least 2 seconds {until you hear a beep) to switch between LOCAL and
DISTANT mode. (The display shows 'LOC' in the LOCAL mode).
- In LOCAL mode the radio will first search for strong stations and then weaker stations.
- In DISTANT mode the radio will search for any receivable signal (useful in areas with weaker
FM signals). "ok
( MANUAL TUNING (if you know the frequency of the required station)
_ [Press the MAN key for at least 2 seconds (until you hear a beep) to switch from
search tuning fo manual tuning.
[2]Tune to the desired frequency with the ~# or = key (keeping the key pressed
changes the frequency quickly).
Note: The radio automatically switches back fo search tuning after about 1 minute.
( STORING STATIONS ON PRESET KEYS
This radio has storage locations for:
18 FM stations 6x FMI, 6xFM2, 6xFM3 (FM3 also used for Auto-Store}
12 MW stations* 6xMWI1*, 6xMW2* {MW2 also used for Auto-Store}
6 LW stations* 6 x LW*
* See 'Preset stations' and 'Auto-Store'.
* Only for certain versions
8