Table of Contents
Advertisement
Only an ADMIN can record.
•
With a valid ADMIN PASSWORD entered, access to all buttons
and features are available to record your custom PRESET. All
buttons remain the same as previously detailed in recording a "DMX
Snapshot" above with the exception of the LEVELS button. Pushing
this button opens access to all the DMX channels that were previously
set for this Main PWS in the DMX SETUP. Eg. PRESET 01.
•
Virtual slider are provided for each channel in the PRESET configured
as dimmers. These provide real time DMX Output for the Main PWS
so that a PRESET can be customized for recording. Menu down to
advance through the assigned channels in groups of 4. DMX channels
are displayed below the bottom of each slider.
•
Non-Dim channels will be displayed as ON/OFF symbols where ON is
Green and OFF is Red. Grey when disabled. Push to toggle.
•
TASK Lights will be displayed as ON/OFF symbols where ON is Light
Blue and OFF is Dark Blue. Grey when disabled. Push to toggle.
In the examples above:
1. The PRESET number (22 0f 70 possible) is displayed at the top left.
2. Navigation across the PRESET is provided by the bottom arrows.
3. DMX channels assigned to this PRESET are displayed in blue across
the bottom of each display.
4. Channel output intensity in percentage is displayed across the top in
yellow.
5. Channel type is assigned mid-screen where virtual slider represent
dimmers and the international ON/OFF power symbol represents
NON-DIM and TASK Channels with color represents their current
state where:
NON-DIM ON = Yellow
NON-DIM OFF = Red
NON-DIM Disable = Grey
TASK ON = Light Blue
TASK OFF = Dark Blue
TASK Disable = Grey
28
More examples below:
WWW.JOHNSONSYSTEMS.COM
Advertisement
Table of Contents
