Table of Contents
Advertisement
Quick Links
IP MiniGlobe, Wall Mount
Instructions
DESCRIPTION
The Wall-Mounted IP MiniGlobe (MGW-IP) is an integrated solution
including a high-quality camera, lens and housing. Like all Wren products,
it is designed for quick and simple installation and servicing.
SUGGESTED INSTALLATION EQUIPMENT
•
#1 Phillips-head screwdriver, for dome and housing screws
•
#2 Phillips-head screwdriver with a long (at least 6") shaft, or
other appropriate tools for installing mounting hardware.
•
Pliers
COMPONENT LIST [Figure 1]
1. Upper Housing
2. #4-40 screws (3)
3. Main Bracket Assy
4. Dome
5. Camera Assy
6. #8 Pan-Head Sheet-Metal Screws (2) (not shown)
7. DC Power Pigtail (not shown)
8. Butt Connectors (2) (not shown)
WARNINGS AND SAFEGUARDS
Prior to installation and use of this product, please observe the following
warnings:
1.
Installation and servicing should be done by qualified personnel, and
all work done should conform to local codes.
2.
Using replacement parts or accessories other than Wren may
invalidate the warranty.
3.
This unit is designed to operate on either IEEE 802.3af POE or
12VDC power. Do not bring any other voltages into the housing.
4.
Make sure that the installation method is capable of supporting
three (3) times the weight of the MGW-IP housing and enclosed
contents.
PROPERTY OF WREN
124 WREN PARKWAY • JEFFERSON CITY, MO 65109 • TOLL FREE (800) 881-2249 • FAX (877) 893-2317
Page 1 of 4
www.wrensolutions.com
MINIGLOBE CAMERAS:
???
High-Resolution Color Board
Camera
INDOOR IP HOUSINGS:
MGW-IP
IP MiniGlobe, Wall Mounted
Figure 1
7L237 REV-C 9/21/2007
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Wren MiniGlobe IP-MGW
Summary of Contents for Wren MiniGlobe IP-MGW
-
Page 1: Warnings And Safeguards
IP MiniGlobe, Wall Mount Instructions DESCRIPTION The Wall-Mounted IP MiniGlobe (MGW-IP) is an integrated solution including a high-quality camera, lens and housing. Like all Wren products, it is designed for quick and simple installation and servicing. SUGGESTED INSTALLATION EQUIPMENT • #1 Phillips-head screwdriver, for dome and housing screws •... - Page 2 PREPARATION Carefully unpack box and verify that all components listed are included [Figure 1]. Remove the dome assembly from the upper housing by loosening the two (2) black #4-40 Phillips-head screws with a #1 Phillips screwdriver. Twist dome counter-clockwise slightly to align the screw heads with the keyhole openings in the dome, remove and set aside, taking care that dome does not become scratched or damaged.
-
Page 3: Troubleshooting
Depending on the end-style of the Cat5 cable, the Upper Housing may push slightly to one side. NOTE This is not unusual, and the Housing will become properly aligned when the dome is installed. 10. Install the dome by positioning the keyhole slots on dome flange over the two #4-40 screws in the bracket and twisting clockwise slightly. -
Page 4: Specifications
SPECIFICATIONS Input Voltage POE (802.3af compliant), or 12VDC ± 10% Power Consumption Approx. 7W Power Connection DC Jack, OD 5.5mm ID 2.1mm (for use when not using POE) Video Connections RJ45 (digital via Ethernet) BNC (analog output) Networking Ethernet 10baseT or 100baseT Algorithm (video) MPEG4 (simple profile) or MJPEG Algorithm (still)
Need help?
Do you have a question about the MiniGlobe IP-MGW and is the answer not in the manual?
Questions and answers